Ubee U10CO35 Cable Modem User Guide, v10_30_10Ubee Interactive 42 IntroductionWelcome to the Ubee family of data networking products. This document provides instructions on how toconnect and use the Ubee U10C035 Cable Modem. The U10C035 Cable Modem provides high-speed accessto the Internet using an active Internet connection provided by your cable service provider.2.1 General FeaturesThe cable modem includes the following features:• Two-way design allows the cable modem to send and receive data over the cable television network.• Data Over Cable Service Interface Specification (DOCSIS™) 3.0 certification ensures interoperabilitywith DOCSIS compliant cable operators.• Cable bandwidth allows up to 4 bonded downstream channels and 4 bonded upstream channels,allowing data rates of up to 152 megabits per second (Mbps)* downstream and up to 108 Mbps*upstream, which is faster than traditional DOCSIS 2.0 cable modems, integrated services digitalnetwork (ISDN), or asymmetric digital subscriber line (ADSL).• Using the cable line means that the cable modem is always on, always connected, and does not tie upyour phone lines.*Note: The following causes may affect the connection speed.• Computer specification, including available RAM space and processor speed.• Software applications that may be using computer’s resources.• Network traffic depending on the time of day.• Max data rate set by your Cable Service Provider based on your service tier.2.2 Device SpecificationsInterface• RF Interface: External F-Connector• CPE Interface: 10/100/1000 Base Ethernet RJ45Downstream• Frequency Range: 88 MHz ~ 1002 MHz• Modulation: 64 / 256 QAM• Maximum Data Rate 4DS: 171 Mbps (152 Mbps)• RF Input/Output Power: -15 to +15 dBmV• Input Impedance: 75 Ω• Channel Bandwidth: 6 MHz