Ubee Interactive Using the Time OptionUbee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015 455.8 Using the Time OptionThe Time option allows you to configure the system time obtained from the networkservers via Simple Network Time Protocol (SNTP). SNTP is a protocol for synchronizingthe clocks of computing devices over networks. The device must be reset for changes totake effect.StepsTo configure system time:1. Click Basic from the main menu.2. Click Time from the left side menu. Field descriptions are listed below the screenexample.Label DescriptionEnable SNTP Enables (Yes) or disables (No) the SNTP feature.Current Time Displays the current system time.System Start Time Displays the accumulated time since the system was started.Time Server 1 Defines the IP address or domain name of the time server.Use the one provided or enter an alternative choice.Time Server 2 Defines the IP address or domain name of the time server.Use the one provided or enter an alternative choice.
