13Standby displaySaveSavePress and hold “SETTINGS MENU”for 3 secondsSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUSETTINGSMENUTIME OF DAY SET PEOPLESALT SETTINGCHLORINESALT LEVELPROGRAMMINGCOMPLETEOFFOFFWATER SOURCEREGEN TIMEPressDOWNorUPto change the settingPressDOWNorUPto change the settingON=OPEN the residual chlorine generatingin the regenerationON=OPEN the salt alarmOFF=CLOSE the residual chlorine generating inthe regenerationOFF=CLOSE the salt alarmMUNICIPALHIGH EFFICIENCYTIME OF DAYYEARMONTHDAYSET HARDNESSThe instruction of residual chlorine generator and salt alarmWhen the salt level is normal,the screen will show “NORMAL”When the salt level is lacking,the screen will show “CHECK”and flash.Between 8:00-17:00,the buzzer will alarm.Open the brine tank,check the salt level.Press the ”MANUAL REGEN” button,the unit will reserve aregeneration at the day,at thesame time the salt alarm reset.Refill the salt.SALT LEVELSALT LEVELNORMALCHECKMANUALREGENReset the salt alarm