USR IOT USR-N668 User Manual

USR IOT USR-N668 User Manual Manual pdf 43 page image

USR-N668 User Manual Technical Support: h.usriot.comJinan USR IOT Technology Limited www.usriot.com43Figure 62 Serial port parameter setting Serial baud rate: baud rate of serial communication , does not support custom baud rate. Check / data / stop: serial port parameters Work mode: 668 of the work is TCP Server /TCP Client/HTTPD Client/UDP Client/ UDP Server Target IP / Domain Name: The target IP which 668 work as the client (TCP Client / HTTPD Client / UDP Client) Local port: set 0 when 668 work as TCP Client, i.e. issued as a random port numberAttention: When using the software to set parameters through the network, the display will be forced to open. Configure parameters through serial port. As follows, the steps are to operate through the serial port - > open theserial port - > enter the configuration state, and then click read reference.Figure 63 software Modify PC's IP and module in the same network segment, or use serial configuration parameters.5.1.2. Setting protocol settings parametersBy setting up the protocol, you can complete the process of search > setting > Restart (save parameters).5.2. Web settings parametersOpen the browser and enter the IP address of 668. By default (192.168.0.7), you can open the login interface of 668.Enteruser name: adminPassword adminClick login, you can enter the login screen.