Smart 1-LineTM Instruction Manual Rev 1.01 www.utilityrelay.comPage 354.1.8 Energy data blockWhen in Run Mode, the Energy data blocks will display energy values from the trip unit with theaddress entered into the Energy block in Designer Mode.The Energy Block contains:• Real Energy (KWHr) (Kilowatt-Hours) or (MWHr) (Megawatt-Hours)• Apparent Energy (KVAHr) (Kilovolt-ampere-Hours) or (MVAHr) (Megavolt-ampere-Hours)Note: If the KWHr or KVAHr value exceeds 5-digits, these fields will change from (kilo) KWHr andKVAHr to (Mega) MWHr and MVAHr.4.1.9 Trip unit iconsWhen in Run Mode, the trip unit icons will change depending on the device at the addressassociated with the Icon block (entered in Designer Mode).Appears if AC-PRO-II is detected (at the address in the Icon block in Designer Mode).Appears AC-PRO is detected (at the address in the Icon block in Designer Mode).Appears if no trip unit is detected (at the address in the Icon block in Designer Mode).
