34UDR-204(C) Operation manual Revision 3.03.2.2.2 Audio SyncAs audio input port is one channel available, user should synchronize audio signal withtargeted video signal. With synchronized channel will record audio as well as video. Butothers will only record video input signal only.3.2.2.3 Channel numberUnder MUX recording mode, quality, frame rate will be selected per channel. So users canchoose targeted channel.3.2.2.4 QualityUnder MUX recording mode, recording quality of each channel will be selectable & Normal,Enhanced, Fine, Super Fine 4 steps are available now.3.2.2.5 Frame rate3.2.2.5.1 NTSCUnder MUX recording mode, User select channel’s recording frame rate and none (norecording), 1, 2, 3, 5, 7, 10, 15, 30 fps will be available.But, with 720 x 480 resolution, user should not set to exceed 30 frame per second withaccumulated total channel recording.3.2.2.5.2 PALUnder MUX recording mode, User select channel’s recording frame rate and none (norecording), 1, 2, 3, 5, 6, 10, 12, 25 fps will be available.But, with 720 x 576) resolution, user should not set to exceed 25 frame per second withaccumulated total channel recording.3.2.2.6 Record modeUnder MUX recording mode, user will choose recording mode channel by channel andselectable parameters and meaning are below.• Manual: Manual recording function that starts record and/or stop recordingmanually by pushing REC key on remote controller or on front key.• Continuous: Continuous recording mode that starts to recording automatically afterturning on the systems.• Motion: Start to record under motion detection. Under Motion, it starts pre-
