Menu
UNICOR HIGHTECH 315N User Manual
  |
Press battery cover slightly and push to the direction of the arrow to open.For the Emergency use : If [Open / Lock] button is not working, then just turn themanual lock by finger to open.DeadboltManual LockOpen/Lock buttonWhen auto lock is setWhen manual lock is setDefault setting is auto lock so the doorwill be locked automatically in 3 secondsafter it's closed.Press [Open / Lock] button of Back Ass'y or turn the manual lock knob to[Locked] position to lock the door.Auto locking modeManual locking modeAuto, Manual locking modeAttentionAuto relocking function : When the door is not opened within 7 seconds afterthe lock is open, the door is relocked automatically.Open battery cover andpress [Register button]Open battery cover andpress [Register button]After the door is opened, auto locking sensor detects auto locking status.When the door is open(auto locking detect sensor is not working),push up [Keypad cover] and press [] button to lock the door.[Register button][Register button](Default setting is auto locking mode.)1. When the auto lock function is set, if the door is closed, it will be lockedautomatically within 3 seconds.2. User can set the manual lock function to unset the auto lock functionto lock the door only when it's necessary.Attention1. If no button is pressed within 7 seconds after push up the [Keypad cover],entering mode will end with error sound.2. When [Keypad lamp] is off, press [] button and enter password.Then, the door will be opened with melody.Product CompositionRegistering and changing the passwordName of parts (Front Ass'y)Name of parts (Back Ass'y)To open the battery coverLocking the door from inside315N 315D 315SAA Battery 4pcs Bolts for installationStrike & Strike spacerUser ManualDigital Keys(315D model only)Smart keys(315S model only)Emergencypower terminalSmart keytouch point(315S)Front Ass'yOpening the door from outsideOpening the door with passwordOpening the door withdigital key (315D)Push [Keypad cover] up. Push down the cover after pressing password andthe door will be opened with melody.[Entering password]CautionCautionRegistering the digital key/smart key (for 2way only)When you register new digital key, smart key or register it again, you need toregister all digital key or smart key at a time.Press [Register button] and [0] button for 5 seconds and all registereddigital keys or smart keys will be deleted.2. Open [Keypad cover] of Front Ass'yand press password (4 ~ 12 digit) except[] and [ # ] buttons.1. Open [Battery cover] of the BackAss'y and press [Register button]once briefly.5. Password registration is finishedif you press [Registraion button].3. Press [] to save. 4. To register another password,repeat No. 2 & 3.1. Open [Battery cover]and press [Register button]briefly.2. Place the digital key orsmart key on the touchpoint of the front ass'y.(Whenever you contact it,registration is done withbeep sound).3. Press [Register button]to complete registration.(Up to 3 passwords can be registered)The door must be open while registering the password.Default password is 1,2,3,4.Deleting digital key or smart key1. In case of registering more than 1 password, all process should be doneat a time. (Existing passwords will be deleted when registering new password)2. When all three passwords are registered, Registration mode will beautomatically end.3. If no password is entered within 7 seconds while registering password,registration will be cancelled.RegisterbuttonDefault setting is auto lock so the doorwill be locked automatically in 3 secondsafter it's closed.Locking the door from outsidePush the [Keypad cover] up and press [] button to lock the door.When manual lock is setWhen auto lock is setOpening the door from insidePress [Open / Lock] button of the Back Ass'y or turn the manual lock knob to[Open] position to open the door.Back Ass'yDigital keytouch plate(315D)Keypad coverKeypadAuto Lock LatchMounting Plate1. Place the registered digital keyto [Digital key touch plate].2. After beep sound, the door will beopened.1. Place the registered smart keyto [Smart key touch point].2. After beep sound, the door will beopened.Opening the door withsmart key (315S)Installation TemplateAs this is a keyless digital door lock, damage may occurto parts of the dead lock system if it is not used accordingto the manual. Users should be fully aware of the manualand how to operate this product.CAUTION315 Series User ManualWarningSafety precautionsThe precautionary measures are for the safety of the user, for the preventionof property damage, and for the avoidance of any inconveniences due toan accident. These must be read and followed properly.• Do not disassemble or alter the lock.UNICOR HIGHTECH CO., LTD- This manual may change without notice in case of product improvement.- Product specifications are subject to change without prior notice.- This manual should not be edited or changed without manufacturer's permission.• Do not install where the distance over 5mmbetween the door and door frame.• Please do not expose the password and change thepassword in regularly. • Please do not mix old with new batteries or usedifferent types. Always use new alkaline batteries.• Do not clean the product with flammable materialssuch as alcohol, benzene or thinners. Suchmaterials may damage the surface or cause a fire.• Replace the current batteries with new ones within1 week after the battery replacement notificationmelody sounded off for the first time.• Do not press using sharp tools or press numericbutton excessively.• Make sure the door is completely locked whengoing out.• Batteries should not be exposed directly to heatsources or flames, or submerged in water, becausethey may leak or explode, resulting in severedamage. Please do not use damaged batteries.• Place the batteries carefully and correctlyaccording to their polarity (+/-). If the batteriesare inserted in a wrong way, differently from theindicated direction or polarity, leakage or rupturecould occur. Pay attention to it.Installation TemplateFolding linefor standardfire-proof doorFolding linefor one-sideopen orboth-sideopen door32mm diameter hole32mm diameter hole |
Related manuals for UNICOR HIGHTECH 315D
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved