UMAX Technologies ASTRACAM 1000 Owner's Manual

Also see for PowerLook 1000: Specifications Operation manual

UMAX Technologies ASTRACAM 1000 Owner's Manual Manual pdf 15 page image

121. Click on the photo you want to recover.2. Click on the AFTER SHOT RECOVERY button on the Photo Display untilthe color of your photo appears normal.Rotate Photos1. Click on the photo(s) you want to rotate. (Press andhold the CTRL key to select multiple photos.)2. Click on the ROTATING PICTURE(S) LEFT 90°button to turn the photo(s) 90 degrees clockwise.Transferring the PhotosTransferring is how you move the photo(s) into photo application software fromthe AstraCam 1000 program.Note: This section only discusses how to transfer photos to programs. Pleaserefer to the documentation with your application software on how to Acquire.To transfer photos to the open photo manipulation program:Single PhotoDouble-click on the photo you want to transfer and it will appear in the photomanipulation program.Selected Photos1. Click on the photo(s) you want to transfer. (Press and hold the CTRL key toselect multiple photos.)Note: Some applications can only take one photo at a time.2. Click on the TRANSFERING PICTURE(S) button inthe Control Panel. Your transferred photo(s) appears inthe photo manipulation program.Saving a Photo to a FileYou might want to just save your photo to a fileso you can delete it from your camera and makeroom for more photos.To save a photo:1. Click on the photo you want to save, and then click on the SAVING A NEWFILE button in the Control Panel.2. When the Save As box appears, make an entry in the file name box andchoose FOLDER to save the photo to the Save To box.3. Click on the SAVE button. Your photo is saved in JPEG format and you canopen the file later in your photo manipulation program.