U-Line Refrigerator/Ice-Maker Combos User Manual

Also see for 29FF: User manual User manual User manual

Contents

U-Line Refrigerator/Ice-Maker Combos User Manual Manual pdf 29 page image

27ADJUSTING ICE CUBE SIZEOn models equipped with an ice maker, the cube size may be adjustedby changing the amount of water injected into the ice maker assembly.1. Remove the ice maker assembly cover (see Figure 39).2. Locate the adjusting screw on the ice maker assembly control box.The adjusting screw is just below the minus (–) and plus (+) signson the control box (see Figure 40).3. Turn the adjusting screw toward the minus (–) sign (clockwise) forsmaller cubes or toward the plus (+) sign (counterclockwise) forlarger cubes.4. Install the ice maker assembly cover.Some units are not frost free and must be defrosted periodically. Referto CARE AND CLEANING.CAUTIONUse only genuine U-Line replacement parts. U-Line icemaker parts are not the same as standard FSP Whirlpoolparts. Using non U-Line parts can reduce ice rate, causewater to overflow from ice maker mold, damage the unit,and may void the warranty.UL133 UL122+–Figure 40Figure 39