U-Line ICE-MAKER/REFRIGERATOR User Manual

Also see for 29FF: User manual User manual User manual

Contents

U-Line ICE-MAKER/REFRIGERATOR User Manual Manual pdf 13 page image

REVERSING THE DOORDepending upon the location of the unit, it may be desirable to changethe side on which the door is mounted.NOTEOn Combo Models 29A and 29FF (built-in installations only),changing the door mounting to the left side may interferewith ice bucket removal. See BUILT-IN INSTALLATION sec-tion for clearance requirements.To reverse the door mounting on Models SP18, BI-15, BI-95, BI-98,15R, 29AD, 29R, Combo 29A, and Combo 29FF, perform thefollowing:1. Remove grill (1 screw). SeeFigure 13.2. Remove top hinge from cabinet(3 screws). See Figure 14.Hold door to keep it fromfalling.11UL116REMOVE SCREWUL1093. Lift the door off the bottom hinge.4. Remove bottom hinge from cabinet (2 screws) (see Figure 15).Remove screws on opposite side of cabinet (see Figure 16). Notethat there may be a nut behind one or both screws on either side.5. Install hinge on opposite side, bottom of cabinet (see Figure 17).Replace nut on back side where installed. Align hinge outer edgewith cabinet before tightening screws.Figure 13 Figure 14