PAGE 1 OF 9 0721 IH-7896H-7896WIRE GARMENTRACK1-800-295-5510uline.comINSTALLATION OF SELF-LEVELERS AND OPTIONAL CASTERS0304050607080903040506070809Figure 1Figure 2TO INSTALL SELF-LEVELERSNOTE: If installing casters, do not install self-levelers.1. Make sure post is positioned as shown. (See Figure 1)2. Insert self-leveler into open end of post.3. Tap on ground until self-leveler slides into post.4. Repeat steps 2 and 3 for other posts.TO INSTALL OPTIONAL CASTERS1. Make sure post is positioned as shown. (See Figure 2)2. Engage the wheel brakes to keep casters from rolling duringassembly. Use a rubber mallet to tap caster stems into posts.(See Figure 2)PARTSSelf-Leveler x 4 Locking Caster x 4Post x 4 Shelf x 2 Shelf Support x 8 SetsPhillips ScrewdriverTOOL NEEDEDHanging Bar x 1Hanging Hook x 2Bolt x 2 Lock Washer x 2Para Español, vea páginas 4-6.Pour le français, consulter les pages 7-9.