U-Line H-7595 Manual

U-Line H-7595 Manual Manual pdf 1 page image

PAGE 1 OF 6 0621 IH-7595H-7595PACKING TABLEFILE DRAWER1-800-295-5510uline.comCAUTION! Some parts may have sharpedges. Care must be taken when handlingpieces to avoid injury. For your safety, weara pair of work gloves when assembling.ATTACHING TO STEEL TOPNOTE: Mounting channels are included withthe steel top. Channels may extend past thedrawer assembly.1. To free drawer from housing, fully extend the drawerfrom the housing. Flip one plastic tab on the slidingrails up and the second plastic tab on the slidingrails down. Drawer is now unlocked from housingand can be removed. (See Figure 1)2. Turn the packing table over. On the underside ofthe table, slide mounting channels front to backinto table flanges. When channels are aligned,mounting holes should be approximately 13½"apart. Secure each channel with two 1/4"-20 x 5/8"bolts. (See Figure 2)3. Attach the drawer housing to the mountingchannels using four 1/4"-20 x 1/2" bolts.(See Figure 2)4. Insert the drawer and turn the packing table rightside up. Cycle the drawer in and out a few times tocheck operation.NOTE: The drawer and suspension have a70 lb. weight capacity.ASSEMBLYFigure 2Figure 1Mounting ChannelsPara Español, vea páginas 3-4.Pour le français, consulter les pages 5-6.TabDrawerTOOLS NEEDEDFlathead Screwdriver Phillips Screwdriver7/16" Wrench Drill and 5/32" Drill Bit(if attaching to wood top)

/ 6

Related manuals for U-Line H-7595

U-Line H-8381 Manual

U-Line H-8379 Manual

U-Line H-6932 Manual

U-Line H-7589 Assembly

This manual is suitable for:

H-7595

U-Line H-7595 Manual

Product

Learn More

Legal