U-Line H-10029 Manual

U-Line H-10029 Manual Manual pdf 1 page image

PAGE 1 OF 18 0422 IH-10029H-10029INDUSTRIALDEHUMIDIFIER1-800-295-5510uline.comSAFETYINSTALLATIONWARNING! This unit has an electric shockhazard, rotating fan and hot surface hazards.Unplug unit before opening cover for cleaningor servicing. Unit must be grounded.• Inspect the power cord before use. If cord isdamaged, do not use. Always grasp the plug(not the cord) to unplug.• Insert three-prong plug on power cord into amatching electrically grounded outlet. Do notuse adapter. Never cut off third prong. Do notuse an extension cord.• It is recommended to operate unit on a115V/60 Hz circuit protected by a Ground FaultCircuit Interrupter (GFCI) device.• Keep motor and wiring dry.• Do not attempt to repair the unit. ContactUline Customer Service at 1-800-295-5510 forassistance.NOTE: Unit is shipped without the handleattached. Install handle using the four 1/4-20hex head bolts supplied and a 3/8" wrench.Ensure bolts are firmly secured before usingunit.NOTE: Unit operates by pulling moist air inacross a cold evaporator core. The moisturein the air condenses on the coil. In certainconditions, the machine operates in defrostmode, warming any frost accumulated onthe evaporator coil back into water. The watercollects in a tray and is pumped out througha hose.IMPORTANT! Before moving the unit, ensure nowater is in the pump.NOTE: Operate in an enclosed area, as thiscreates a drying chamber. Close all doors andwindows that open to the outside to maximizethe unit's water removal efficiency. Keeptraffic through the drying room to a minimum.Place dehumidifier against a wall, away fromobstructions, and keep it away from anythingthat could block airflow into and out of the unit.NOTE: Optimal drying temperatures range from68-85°F.Para Español, vea páginas 7-12.Pour le français, consulter les pages 13-18.