18User’s ManualGLASS SHELF INSTALLATION(for models with Glass Shelves)1. Carefully remove the glass shelves from the packaging.Figure 152. Slide the shelves onto lower two sets of ribs, making sure the sil-ver edge strip is toward the front of the unit and the decorativegraphics are on the underside of the shelves. Make sure theshelves are inserted fully into the unit (Figure 15). The white edgestrip toward the rear prevents cans and bottles from freezingagainst the cold evaporator.NOTEBe sure to place shelves with the silver edge to the frontand decorative graphics on the underside. 75 BEV does nothave a silver edge strip.75 BEVUL108a