U-Line 1224R User Manual

Also see for 1215R: User guide User guide & service manual User guide & service manual User guide & service manual

Contents

U-Line 1224R User Manual Manual pdf 18 page image

USER GUIDEDoor Stop 1u-line.comSAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICEDoor StopYour U-Line unit was shipped to you with the optional90° pin(s). (Models that are 15" wide include 1 pin. Modelsthat are 24" wide include 2 pins.) The unit’s door will openfreely without a fixed opening angle limitation. If youwould like the door stop at 90° follow these instructions.NOTICEThe pin is designed to stop the door at 90° undernormal operating conditions. It is not designedfor excessive force. Do not use the door to movethe unit in/out of the cutout during installation.If your unit is already undercounter, it mightneed to be moved out/forward to access thehinge.1. Locate the threaded pin.2. With the door between 0° (closed) and 90° and using a3/32" hex driver, install the threaded pin through thehinge.3. On 24" models, a second pin is included for the bottomhinge. Repeat steps above for second hinge.NOTE: Threaded pin will be inserted from the bottom.4. Carefully slide your unit back in place.NOTICEThe pin can be removed to return the door swingback to its original state by unscrewing thethreaded pin.