Toshiba e-STUDIO6550C Series Manual

Also see for E-studio2040c: Software installation guide Management guide Quick start guide Printing guide Safety information

3.SETTING OPTIONSSetting up the N/W-Fax Driver Options 293 SETTING OPTIONS7) Sender InformationCheck this to have the sender’s information appear on the cover sheet. You can enter the information in up to 500characters.8) SubjectCheck this to have a subject appear on the cover sheet. You can enter the subject in up to 40 characters.9) MessageCheck this to have a message appear on the cover sheet. You can enter the message in up to 500 characters.10) [Restore Defaults]Click this to restore the default setting values. Setting up the SNMPIf the recipient’s TOSHIBA MFP is not found over the Internet and the fax job is not sent normally, the SNMP settings maybe the cause. Check that the SNMP settings are correct in the [SNMP Settings] dialog box, and if not, change them.Ask the administrator for details on the SNMP Network settings configured for your TOSHIBA MFP.1) VersionBe sure to have the correct SNMP version set for your TOSHIBA MFP and select from the following options:- V1/V2 — Select this option to enable SNMP V1 and V2.- V3 — Select this option to enable SNMP V3.- V1/V2/V3 (for [Discovery Settings] dialog box only) — Select this option to enable SNMP V1, V2, and V3.1234