Toshiba e-STUDIO355 Copying Manual

Also see for e-studio205L: User manual Management guide Troubleshooting guide Service handbook

Contents

4.EDITING FUNCTIONSDual Page 974 EDITING FUNCTIONS5 Press the [BASIC] tab to display the BASIC menu, and then select A4, B5 or LT as thecopy paper size.When using bypass copying, be sure to set the paper size.Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it withforce.Breaking the glass could injure you.7 Press the [START] button on the control panel. When the scanning of the opened pagesis finished, open the next pages and place them.Repeat this procedure until all the desired pages have been scanned. If the last page is a single page, press[COPY FINAL PAGE] on the touch panel, and then press the [START] button on the control panel to start scanning.The scanned pages will be copied.8 When all the pages have been scanned, press [FINISHED].The scanned pages will be copied.6 Open the desired page of the original and place it onthe original glass.Place the original with its bottom toward you, matching its center to theyellow indicator under the original glass.