Toshiba e-STUDIO352 Quick Start Manual

Also see for e-STUDIO232: Operator's manual Network fax guide Sales guide User manual Service manual

Contents

5 SETUP FLOW64 SETUP FLOW FOR PRINTING FEATURESSetup Flow for IPP PrintingThis equipment can be used with the IPP printer connection for UNIX workstation in a TCP/IPnetwork using CUPS. Even though IPP printing can be used in a local area network, this methodis commonly used to print over the Internet. If you allow IPP printing through the Internet, youmust configure the DNS server to enable users to access this equipment over the Internet usingthe HTTP protocol. This is useful when users want to print to this equipment from outside thelocal area network.Setup Flow Description/ReferenceConnect this equipment Connect the machine to your network with a network cable.Reference: QUICK START GUIDEy Chapter 4 “CONNECTING TO THE DEVICE”“2. CONNECTING TO THE NETWORK”Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.Reference: USER FUNCTIONS GUIDEy Chapter 4 “SETTING ITEMS (ADMIN)”“3. SETTING NETWORK FUNCTIONS”“Setting the TCP/IP Protocol (IPv4)”Reference: TopAccess Guidey Chapter 7 “TOPACCESS ADMINISTRATOR MODE”“Setting up from TopAccess”“Setting up Network Settings”“Setting up the TCP/IP”Set up the IPv6 Assign the IP address, prefix, Gateway address.Reference: USER FUNCTIONS GUIDEy Chapter 4 “SETTING ITEMS (ADMIN)”“3. SETTING NETWORK FUNCTIONS”“Setting the TCP/IP Protocol (IPv6)”Reference: TopAccess Guidey Chapter 7 “TOPACCESS ADMINISTRATOR MODE”“Setting up from TopAccess”“Setting up Network Settings”“Setting up the IPv6”Unix workstationConnecting over InternetSetting up the IPPprinter connectionusing CUPSÐÐÐÐÐÐ