e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC4 - 24[ 4 ] Recovery Transmission [MENU], [5], [3], [04]This sets the Recovery Transmission ON or OFF. When set to ON, a transmission that has failed, andthe specified redial attempts have been made, will be stored in memory. The stored transmit job can beresent before the time period set below has expired. When set to OFF, such transmissions will automat-ically be cleared from memory. When the ON status selected, the time period to store such documentsin memory is also set.1) Use the [Ç] or [È] keys to select the desired option (ON or OFF), then press the [ENTER] key.ONWhen set to ON, documents are stored after a failed redial attempt for the time period designatedbelow. After that time has expired, the stored documents are cleared from memory.OFFWhen set to OFF, documents are cleared from memory immediately upon completion of the lastredial attempt.2) The screen below is displayed. Enter the desired time length for storing the document data (01 to24, in units of hours), then press the [ENTER] key.STORE TIMEA value 1 to 24 (hours) can be entered.3) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Modescreen.RECOVERY TX1 . ON2 . OFFSTORED TIME(1-24) [ 8]
