Toshiba e-STUDIO163 Service Manual

Also see for e-STUDIO163: Specifications Operator's manual Service handbook Service handbook Service handbook

Contents

e-STUDIO163/203 PAPER FEEDING SYSTEM December 2005 © TOSHIBA TEC10 - 411)Bypass feed clutchSpring-type (mechanical) one-way clutch which used to transmit the drive from the main motor (M4)to the bypass feed roller. When the bypass pickup solenoid (SOL2) is turned OFF, the spring ten-sion of the one-way clutch decreases to cut off the drive.12)Registration rollerPaper transported from the pickup roller or bypass feed roller is pushed against the registrationroller which aligns the leading edge of the paper. Then, the registration rollers rotate to transport thepaper to the transfer position13)Registration roller clutch (CLT1)Electromagnetic clutch which drives the registration roller. When the registration roller clutch (CLT1)is turned ON, the drive is transmitted from the main motor (M4) to rotate the registration roller.14)Registration sensor (S4)This sensor detects that the leading edge of the paper has reached the registration roller and thetrailing edge of the paper has passed the registration roller.15)Drawer detection sensor (SW5)The switch to detect whether the drawer is closed or not.