Toshiba dynadock PA5238U-1PRP Quick Start Manual

Docking station setup1. Connect the monitor cables to theHDMI/DisplayPort and the USB devicesto the docking station.2. Go to http://dynadock.com anddownload the latest drivers and utility.3. After software and drivers are installed,proceed to the next steps to use thedocking station features.4. In the Windows task tray, right-click on the dynadockWiAC icon ( ).5. Select dock or undock to dock/undockwirelessly with the monitor(s) and USBdevices attached to the dynadock wirelessdocking station.NOTE: The undock/dock icons are displayed in one of two colors,depending on the docking status. The Undocked statusis indicated by the grey icon, and the Docked status isindicated by the blue icon.Wireless connection with your computer1. Verify that your Windows® computer is powered on.2. Right-click on the Windows Wireless Connection Manager ( )in the system tray and choose the “dynadockWiAC_XXXXX”.3. When prompted for a password, press the WPS (Wi-FiProtective Setup) button on the top of the unit to populate thepassword.NOTE: If the WPS connection is unsuccessful, you can enter in thepassword manually (printed on the label on the underside ofthe Product).The dynadock docking station is now connected wirelessly andcan be used as a Wireless Access Point (WAP).Download & installdrivers fromdynadock.com

/ 4

Related manuals for Toshiba dynadock PA5238U-1PRP