Menu
Toshiba WT12PE-A Series User Manual
Also see for dynaPad WT12PE-A Series: Quick start guide
                                                                                                             |
Connecting an external displayYour computer comes with a built-in display, but you can also connectother external displays via available ports on the computer.As the port operation of all external display devices have not beenconfirmed, some devices might not function properly.HDMI portHDMI (High-Definition Multimedia Interface) port digitally transfers bothvideo and audio data without reducing the quality. HDMI-compatibleexternal display devices including televisions can be connected via theHDMI port.To connect an HDMI-compatible display device, do the following:As the port operation of all HDMI display devices have not beenconfirmed, some HDMI display devices might not function properly.To connect a device to the HDMI out port, you must purchase asuitable HDMI cable.1. Plug one end of the HDMI cable into the HDMI in port of the HDMIdisplay device.2. Plug the other end of the HDMI cable into the HDMI Micro port on yourtablet computer.3. Turn the HDMI display device's power on.Figure 4-18 Connecting the HDMI Micro port211. HDMI Micro port 2. HDMI cable (Type D connector)Do not plug/unplug an HDMI device under the following conditions:The system is starting up.The system is shutting down.When you connect a television or external monitor to the HDMI port, thedisplay output device is set to HDMI.When you unplug the HDMI cable and replug it, wait at least 5 secondsbefore you replug the HDMI cable again.User's Manual 4-21 |
Related manuals for Toshiba dynaPad WT12PE-A Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved