E6581611E-2455.10.2 Displaying the motor or the line speedf702 : Frequency free unit display magnificationf703 : Frequency free unit coverage selectionf705 : Inclination characteristic of free unit displayf706 : Free unit display bias FunctionThe frequency or any other item displayed on the monitor can be converted into the rotational speed ofthe motor or load device. The unit of the amount of processing or that of feedback can be changed at PIDcontrol.The value obtained by multiplying the displayed frequency by the f702-set value will be displayed asfollows:Value displayed = Monitor-displayed or parameter-set frequency f7021) Displaying the motor speedTo switch the display mode from 60Hz (default setting) to 1800min -1 (the rotating speed of the 4P motor) ＝×.=＝．Hz2) Displaying the speed of the loading unitTo switch the display mode from 60Hz (default setting) to 6m/min -1 (the speed of the conveyer)Note: This parameter displays the inverter output frequency as the value obtained by multiplying it by apositive number. This does not mean that the actual motor speed or line speed are indicatedwith accuracy.[Parameter setting]Title Function Adjustment range Default settingf702 Frequency free unit displaymagnification0.00: Disabled (display of frequency)0.01-200.0 (times) 0.00f703 Frequency free unit coverageselection0: All frequencies display1: PID frequencies display 0f705 Inclination characteristic of free unitdisplay0: Negative inclination (downwardslope)1: Positive inclination (upward slope)1f706 Free unit display bias 0.00-fh (Hz) 0.00 ＝． ＝.×.=.Hz
