Toshiba VC-GC32BSA Owner's Manual

Contents

222. How to clean the pleat filter① Turn the cup cover to the mark " " in thedirection of the arrow to remove it.② Slide the dust cleaning slider right and left forabout 5 times.③ Press the button on both sides of the pleatfilter to disassemble it.④ Remove the dust attached on the pleat filterusing the cleaning brush and then empty theseparation net.* The pleat filter could be cleaned after cleaning thedust cup.* Do not press the cup button when emptying theseparation net to avoid dropping.* When emptying any vacuum cleaner it is difficult to avoid exposure to dust. To minimize this risk, please ensurethat you encase the dust cup in a large bag to empty it and close the bag as tightly as possible round the dust cup.Remove the dust cup and close the bag as tightly and quickly as possible and dispose of this immediately. It isadvisable to wear disposable gloves and a face mask while emptying the cleaner. If at all possible, ask a nonallergy sufferer to empty the dust cup when required.Storage InstructionStore the vacuum cleaner as the following way after use.HoleStand HolderStorage Methods:① Wind the hose to the telescopic wand.② Pull the floor head close to the appliance body.③ Insert the stand holder into the hole of theappliance while keeping the telescopic wandstand straight.Dust cleaning sliderCupcoverButton Button141114c1_VC-GC32BSA.indb 22 2014/11/14 16:11:47