OPERATIONSRELOADThis operation can be executed during the washing process. When the drum isstill rolling and there is large amount of water with high temperature in the drum.The state is unsafe and the door cannot be opened forcefully. To press[START/PAUSE] for 3 sec. to reload, and small amount of clothes can be addedduring washing process. Please follow the steps as bellow:1.Wait until the drum stops rotation.2.The door lock is unlocked.3.Open the door , add clothes to the drum, and close the door. Then press the[START/PAUSE] button.START/PAUSE3sec.Add ClothesPress[START/PAUSE]• Don't use the Reload function when the water level over the edge of theinner tub or the temperature is higher.Caution!DELAY ENDSet the Delay function:1. Select a programme2.Press the DELAY END button to choose the time(the delaying end time is 1-24 H.)3.Press [START/PAUSE]to commence the delay operationChoose the Programme StartON/OFF Setting timeDELAYENDCaution!• If there is any break in the power supply while the machine is operating,a special memory stores the selected programme and when the power isrestarted, the machine will run the previous program automatically.• While the machine is delaying, If there is any break in the power supply ,themachine can’t start up operation automatically. You should set it again.[ON/OFF]Cancel the Delay function:Press the [DELAY END]button until the display be 0H.It should be pressedbefore starting the programme. If the programme already started, should press thebutton to reset the programme.20