Toshiba TDDP2213ES2 User Manual

User Manual Page 7Key Pad FeaturesControl PadsOperatingInstructionsComfort dehumidifyingoperation on indicator lightBucket fullindicatorlightTimer on/indicatorlightHigh fanindicatorlightContinuous operationon indicator lightAuto defrostoperationon indicatorlightlterindicatorlightPump modelsonlyLEDDisplayCAUTIONClean your unit occasionally to keep it looking new. Be sure to unplug the unit beforecleaning to prevent shock or re hazards.NOTEThe appearance of the control panel may vary slightly by model.When you push the button to change operationmodes, the unit will make a beep sound to indicatethat it is changing modes.PUMP Button(Pump models only)Press to activate the pump operation.NOTE: Make sure the pump drain hose is installedinto the unit and the continuous drain hose isremoved from the unit before the pumpoperation is activated. When the bucket is full, thepump starts to work. Refer to the next pages forremoving the collected water. Do not use thisoperation when the outdoor temperature is equelto or less than 0ºC (32ºF).COMFORT ButtonPress to activate the COMFORTdehumidifying operation. The dehumidifier willautomatically set to a preset humidityand fan level. To exit comfort mode, adjustthe humidity to desired level.NOTEWhen CONTINUOUS function is turned on,set humidity level is automatic and cannotbe changed manually.for more operation. The LED (light)peration.To reset after cleaning the ter, pressthe Filter button and the light will go o .CONT (continuous) ButtonPress to activate the continuous dehumidifyingoperation.FILTER ButtonThis feature is a reminder to clean the Air Filter