16 How to Set Holidays in a Scheduled Week of OperationOperations programmed for a specific day during the week can be temporarily disabled by setting that day as aholiday.• When the set holiday passes, the holiday setting is canceled and operation is resumed as programmed thefollowing week.• Holidays can be selected for the week starting from today’s day. If today is selected as a holiday, the holidaysetting is canceled from the next programmed operation. (Depending on the program, if the program is currentlyrunning, the program may not stop.)Example SettingSTEP 1 Press the GROUP button to select a group to go onholiday.NOTE• Depending on installation conditions, groupselection is disabled or set so that all groups areautomatically selected for the holiday feature. If so,proceed to the next step.STEP 2 Press the HOLIDAY button.• “HL” starts blinking in the present time display areaand today’s day of the week starts blinking.STEP 3 Select a day as the holiday using the DAY button,and press the SET button.• A “ ” appears over the selected holiday.• To select other holidays, select a day using the DAYbutton and set it with the SET button.• If you made a mistake or want to cancel a holiday,press the CLEAR button.Today is Thursday and Friday isset as a holiday.When Friday comes, theprogram set for that day doesnot run.When Saturday comes,Friday’s holiday setting iscanceled.OI-915-16-EG