Toshiba Strata DKT3010F-S User Manual

Also see for Strata CTX DKT3000 Series: User guide User guide User guide User guide User guide

52 Strata CTX DKT3000/2000-Series Digital Telephone October 2002Speed Dial Advanced Operation➤ To store a Station Speed Dial Number using an Access Code1. Dial #66. The display shows “SPEED DIAL” and you hear Entry Tone.2. Dial the Station Speed Dial number (100~199). The LCD shows your digits and you hear Entry Tone.Note Selected telephones may have the ability to change System Speed Dial numbers. Follow thisprocedure but specify a System Speed Dial number (200~999) instead.3. Enter the destination digits, then press #. The LCD shows “SPEED DIAL” + the Speed Dial Number+ destination + #. You hear Success Tone.4. Release the telephone. To enter another number, repeat the process, starting withStep 1.CTX System AdministrationThe third method of storing station Speed Dial numbers is via your CTX System Administrator, whocan establish your Station Speed Dial number through administrative software and associate a namewith it. This name is used by the Directory Dialling feature of DKT3014 large display telephones.Advanced Speed Dial OperationSpecial CharactersSpeed Dial Numbers may include 0~9, #, * and Pause. When using the Access Code input method(see above) it is also necessary to use # to indicate you have finished entering the destination number.This creates 14 functions to be input from the 12 buttons on the dial pad.Long Speed Dial NumbersSpeed Dial Numbers are stored sequentially in memory areas capable of holding 32 digits. If youexceed 32 digits, the excess are stored in the next higher area and consume the next sequential SpeedDial Number.You can dial the entire string by entering the original Speed Dial Number and all digits will be sent,including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer beavailable. You are not prevented from storing a new Number 101 but, if you do, Number 100 will beshortened to 32 digits.