Toshiba Satellite 110 Series Maintenance Manual

Also see for 110CS - Satellite - Pentium 100 MHz: Brochure Specification sheet

3-48 110 Series(b) Selecting a media/drive type number displays a message similar to the onebelow:Insert source disk into drive A:Press any key when ready.(c) Remove the Diagnostics Disk from the FDD, insert the source disk, andpress any key. The following message appears, indicating the program hasstarted.[ FDD TYPE ] : TRACK = XXX[ FDD TYPE ] : HEAD = X[ FDD TYPE ] : SECTOR = XXCopy start[[ track,head = XXX X ]](d) Remove the source disk from the FDD, insert a formatted work disk, andpress any key. The [[ track, head = XXX X ]] message appears and thedata starts copying to the target disk. When the amount of data is too largeto be copied in one operation, the message from Step (b) displays again.After the floppy disk has been copied, the following message appears:Copy completeAnother copy (1:Yes/2:No) ?(e) To copy another disk, type 1 and the message from Step (a) displays again.Entering 2 returns the test program to the Diagnostics Menu.4. DUMP Program(a) When dump is selected, the following message appears:DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XXDrive type select (1:FDD, 2:HDD) ?(b) Select a format type number. If C or D is selected, the display goes to Step(e).Select drive number (1:A, 2:B) ?(1:C, 2:D) ?(c) Select a drive number and the following message displays:Format type select (1:2DD, 2:2D, 3:2HD) ?(d) Select a media type number and the following message appears:Insert source disk into drive A:Press any key when ready.