Toshiba Regza WL68 Owner's Manual

Also see for Regza WL68: Quick setup guide Owner's manual

6Connecting external equipmentBefore connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket.Aerial cables:Connect the aerial to the socket on the rear of thetelevision. If you use a decoder* and/or a media recorderit is essential that the aerial cable is connected throughthe decoder and/or through the media recorder to thetelevision.SCART leads:Connect the video recorder IN/OUT socket to thetelevision. Connect the decoder TV socket to thetelevision. Connect the media recorder SAT socket to thedecoder MEDIA REC. socket.Before running Auto tuning put your decoder and mediarecorder to Standby.The phono sockets alongside the COMPONENT VIDEOINPUT sockets will accept L and R audio signals.HDMI™ (High-Definition Multimedia Interface) is for usewith a DVD, decoder or electrical equipment with digitalaudio and video output. It is designed for bestperformance with 1080i and 1080p high-definition videosignals but will also accept and display 480i, 480p, 576i,576p and 720p signals. NOTE: HDMI cables should beless than 5m.media recorderdecoder*CABLE HOLDERFIXING STRAPHDMI™ INPUT SOCKETSSCART 2 (EXT2)COMPONENTVIDEO (EXT3)SCART 1 (EXT1)*a decoder couldbe Digital Satelliteor any othercompatible decoder.IN/OUTMEDIA REC.TVSATPLEASE NOTE: Although this television is able to connectto HDMI equipment it is possible that some equipmentmay not operate correctly.A wide variety of external equipment can beconnected to the back of the television, thereforethe relevant owners manuals for all additionalequipment must be referred to.We recommend SCART 1 for a decoder and SCART 2 fora media recorder.If connecting S-VIDEO equipment, set the INPUT forEXT2. See page 22.If the television automatically switches over to monitorexternal equipment, return to normal television bypressing the desired programme position button. Torecall external equipment, press Bto select betweenEXT1, EXT2, EXT3C, HDMI1, HDMI2, HDMI3 or PC.The cable holder can be used for aerial, media recorderand audio cables. Do not use the cable holder as ahandle and make sure all cables are removed beforemoving the television.HDMI, the HDMI logo, and High-Definition Multimedia Interface aretrademarks or registered trademarks of HDMI Licensing, LLC.