Menu
Toshiba ProtoNode Quick Install Manual
        |
ProtoNode Quick Install Guide – 66939-000 1ProtoNode Quick Install Guide1.0 IntroductionProtoNode is a multi-protocol client/server device that is reliable to network serial and Ethernet devices.The ProtoNode works with SNMP, MODBUS RTU (Serial), MODBUS TCP, BACnet IP, BACnet MSTP(Serial),EtherNet/IP and Metasys N2. This Quick Install Guide provides the necessary information to set up anduse the ProtoNode as quickly as possible.2.0 Package Components1. Quick Install Guide2. ProtoNode (Multi-Protocol Device Server)3. One Cat5e direct Ethernet cable4. One serial cable (Connection link between UPS and ProtoNode)5. One power supply3.0 Installing the ProtoNodeStep 1: Installation of the ProtoNode HardwareEach ProtoNode has a unique serial number and MAC address located on the underside of the unit.These numbers should be recorded as they may be required for technical support.Serial Number: _________________________________________________MAC Address: __________________________________________________1. A DB-9 cable should be connected between the Serial 1 port on the ProtoNode and theserial port of the Toshiba UPS RS-232 port (See Figure 1). NOTE: for G8000 UPS use astraight serial cable. Use a gender changer if needed.2. Connect one end of the Ethernet cable to the ProtoNode RJ45 port and the other end toyour computer (switch or Hub) RJ45 port. NOTE: The ProtoNode Ethernet port automaticallysenses an uplink connection, and may therefore be connected to a PC or a hub/switch usingeither a crossover cable (not supplied) or a direct Ethernet cable (supplied).3. Connect the 5-30 VDC power supply adapter to the terminal block in the back of theProtoNode. |
Related manuals for Toshiba ProtoNode
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved