16 ENPicture RecordingIn Picture Record Mode (The• Picture Record LED Indicator lights up), press OK Button halfwaydown until the focusing frame turns from white to green. Then, press it fully down to take a picture.Press Playback Button to view the picture.•Three resolution settings are available:•Image QualityHigh Quality:16 Mega PixelsStandard Quality:10 Mega PixelsLow Quality:3 Mega PixelsUsing Flash or Digital Light FunctionThis camcorder has three flash settings and one setting to allow you to extend the brightness of the•objects that are dark or in the shadow. Using Left Button to change the settings.Flash Auto (1. ): The flash fires automatically according to light conditions. Use this mode forgeneral photography. (Picture Recording Only)Red Eye2. Reduction( ): The pre-flash will fire to reduce the red-eye effect. (Picture RecordingOnly)Digital Light3. ( ): To extend the dynamic range for backlight and high contrast sense so thatthe objects will be brighter and clearer.Flash Off (4. ): The flash will not fire under any circumstances. Use this mode when takingimages in a place where flash photography is prohibited, or when the subject is distant (beyondthe range of the flash). (Picture Recording Only)NoteThe flash will be disabled automatically when the battery power is low ( ).Using Zoom FunctionThe zoom magnifies images when recording movies or taking pictures.•To zoom in/out, press the Tele/Wide Button.1.It can be set from 1X~5X (5X Optical zoom and 1X Digital zoom)/1X~20X (5X Optical zoom and4X2.Digital zoom)