Menu
Toshiba LICSTAR-IV SE Instruction Manual
                                                                                                                                                                                                                                                                      | |
Contents
|
BLIND Screen13.4) Change the level(s) geometricallyRotate the level wheel upward to raise the level of the specified CH on the screen.Rotate the level wheel downward to lower the level of the specified CH on the screen.Example) Raise of lower the level of CH1 geometrically using the level wheel.> 1 % Level wheel↑The COMMAND line on the screen displays the level at the time after %.14) Specifying CH levels in groups14.1) Specify CH levels in groups.> GROUP Group number @ LevelExample 1) Set the levels of the CHs assigned to GROUP1 to 100%.> GROUP 1 @FLExample 2) Set the levels of the CHs assigned to GROUP1 and GROUP3 to 50%.> GROUP 1 + 3 @ 5 0Example 3) Set the levels of the CHs assigned to GROUP4 to GROUP7 to 8%.> GROUP 4 ∼ 7 @ 0 814.2) Restore the levels of the CHs in groups to the most recently specified levels on the screen.* This operation cannot restore the level of any CH to that before the most recently specified one.@UNDOExample) Set the levels of CHs assigned to GROUP1 to 100%, then to 50%, and then restore them to100%.> GROUP 1 @FL> GROUP 1 @ 5 0> GROUP 1 @UNDO14.3) Restore the levels of CHs in groups to the recorded values.> GROUP Group number @ RETURNExample) Restore the levels of the CHs assigned to GROUP1 to the recorded values.> GROUP 1 @RETURN14.4) Keep the levels of CHs in groups unchanged in this CUE.> GROUP Group number @ RESETExample) Keep the levels of the CHs assigned to GROUP1 unchanged in this CUE.> GROUP 1 @ RESET11-9 |
Related manuals for Toshiba LICSTAR-IV SE
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved