Toshiba LF414 Instruction Manual

Also see for LF414: Manual

－３１－６Ｆ８Ａ０８７０CAUTION Install a switch and fuse to isolate theLF414/LF600F, LF610F and LF414 frommains power. Turn off mains power before conducting wiringwork.DOPower supply from mains power cancause electric shock or circuitbreak-down. DOWiring while power is applied can causeelectric shock. Do not work on piping and wiring with wethands. Ground the LF600F, LF610 independently frompower equipment. (100 ohm or less groundresistance)DON’TWet hands may result in electricshockDOOperating this product without groundingcan cause electric shock or malfunction. Do not conduct wiring work with bare hands. For the power supply wiring and grounding wiring,use crimping terminals with insulated sleeve.DON’TRemaining electric charge even ifpower is turned off can still causeelectric shock. DOThere is a risk of electric shock due todrop-off or loosing, and a risk of fire andequipment trouble due to heat generation.Do not modify or disassemble the LF600F,LF610F, LF602F and LF612Funnecessarily.DON’TModifying or disassembling thisproduct can cause electric shock,malfunction of or damage to thisproduct.The label shown left is placed near thepower supply terminal on theconverter.Be alert to electric shock.Flowmeter accuracy may be affected by the way wiring is executed. Proceed with correct wiring takingthe precautions in following pages.