Toshiba KT-17SHNH User Manual

the switch down to switch the kettle on.The power switch will illuminate showing the kettle is in operation.When the water has reached the correct temperature, the powerswitch will switch off.You can stop the boiling at any time by lifting the switch up. Tore-boil, press the switch again. If the water is very hot, it maybe necessary to wait until the switch resets.Always ensure the lid is tightly fitted and never lift it while thekettle is boiling or you run the risk of scalding. If the lid is notcorrectly fitted while boiling, the automatic cut-out will notoperate, you may boil the kettle dry and cause damage due toexcessive steam emissions.After boiling, switch off the appliance at the mains. The kettlenow could be safely removed from its base and pour out theboiled water. Always pour boiling water slowly and carefullywithout tipping the kettle too quickly.Never leave hot water in the kettle while it is unattended.After use, replace the kettle on its base.Before first use or after storage:Fill the kettle with fresh water. Boil the water. Pour away theboiled water. Repeat this two or three times. The kettle is nowready for use.USING YOUR KETTLE6

/ 18

Related manuals for Toshiba KT-17SHNH