Toshiba IK-WB02A User Manual

Also see for IK-WB02A - PoE Network Camera: Quick start guide Specifications

86Installation/Set up Viewing • Listeningand OperationRecording Setting up OthersDisplay of LogsLogs are saved in an SD memory card. When the SD memory card is not set, no logs areaccumulated.Up to about 4,000 logs can be accumulated on an SD memory card.Display DescriptionSystem BootChange QualityChange resolutionChange BrightnessChange ContrastChange SaturationChange HueSet FlickerlessChange Area(BLC)Change AE LevelCamera NameSet Time TypeSet Text ColorChange Camera TimeSet Daylight SavingLoad default configUpload IPCameraExport configImport configSet User checkAdd UserDelete UserChange AdminFormat SD cardSet Alarm DetectSet Motion DetectSet ConnectionSet Http portSet MailSet POP before SMTPSet FTP ClientSet FTP PortSet FTP ModeSet FTP connection typeConnection FTP EnableChange FTP ScheduleChange FTP Alarm/Motion DetectionChange FTP EXT ControlAccumulation When FTP ErrorSet FTP ServerThe system was booted (rebooted)The image quality is changedThe resolution (image size) is changedThe brightness is changedThe contrast is changedThe saturation is changedThe hue is changedThe flickerless is setThe back light compensation area is changedThe AE level is changedThe camera name is changedThe form of date/time display is changedThe color of date/time display is changedThe date/time on the camera is changedThe daylight saving is setThe settings are reset to the default stateThe firmware on the camera is updatedThe configuration is exportedThe configuration is importedThe access restriction is setThe User login is addedThe User login is deletedThe Administrator login is changedAn SD memory card is formattedThe External Alarm Detection is setThe Motion Detection is setThe connection setting is configuredThe HTTP port number is setThe Mail setting is configuredThe POP before SMTP setting was enabledThe FTP client setting is configuredThe FTP port number is setThe FTP transfer mode is setThe FTP connection type is setAn item to record images to an FTP server is setThe Periodic FTP Recording by Schedule is changedThe FTP Recording by External Alarm/Motion Detection is changedThe FTP Recording by EXT Control is changedThe data accumulation to an SD memory card at the time of FTP error occurrences is setThe FTP Server setting is configured