Toshiba IK-WB02A Quick Start Manual

Also see for IK-WB02A - PoE Network Camera: User guide Specifications

Contents

thank you

24) Run the Toshiba Camera Finder software toautomatically detect your cameras. Refer to theOperations Manual for more details.5) If the camera is not found, power off the camera andrepeat the above steps. (The camera takesapproximately 30 seconds to start.)6) Click on User.If you do not have a static IP address for your Internetconnection, Toshiba offers DDNS service that will allowyou to have an Internet address for your camera.1) Register for Toshiba's DDNS service by clicking onthe link IK-WB02A settings under Configuration >DDns Settings.2) Follow the instructions to set up your account.Quick Start Guide for Direct* PC connection* A Cat5 Crossover cable is required.The following software must be downloaded and installedbefore installing the IK-WB02A:• Internet ExplorerTM Version 6.0 or laterhttp://www.microsoft.com/windows/ie• Toshiba Camera Finder softwareThe software is included on the supplied mini CD-ROM.1) Connect the IK-WB02A to your PC using a Cat5Crossover cable BEFORE powering on your camera.Network camera Personal computerStatic IP address192.168.0.30Ethernet cable ( crossover cable)Static IP address192.168.0.50Quick Start Guide (Cont.)

/ 4

Related manuals for Toshiba IK-WB02A - PoE Network Camera