Toshiba IK-6420A User Manual

Contents

IK-6420A1-1- 3 -• The CAUTION label, shown on the left,is attached on the camera.CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The lightening flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to thepresence of uninsulated “dangerousvoltage” within the product’s enclosurethat may be of sufficient magnitude toconstitute a risk of electric shock topersons.The exclamation point within anequilateral triangle is intended to alertthe user to the presence of importantoperating and maintenance (servicing)instructions in the literatureaccompanying the appliance.WARNING :TO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE TO RAIN ORMOISTURE.CAUTION :CONNECT 24V AC UL LISTED CLASS 2POWER SUPPLY.FIELD INSTALLATION MARKING :THIS INSTALLATION SHOULD BEMADE BY A QUALIFIED SERVICEPERSON AND SHOULD CONFORM TOALL LOCAL CODES.FCC (USA)-INFORMATIONNOTE : This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference in which case the user will be required to correct theinterference at his own expense.USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment couldbe voided if you make changes or modifications not expressly approved by the party.- 2 -1. Read InstructionsAll the safety and operating instructions should beread before the product is operated.2. Retain InstructionsThe safety instructions and instruction manual shouldbe retained for future reference.3. WarningsComply with all warnings on the product and in theinstruction manual.4. Follow InstructionsFollow all operating and use instructions.5. CleaningDisconnect this video product from the power supplybefore cleaning.6. AttachmentsDo not use attachments not recommended by thevideo product manufacturer as they may causehazards.7. Water and MoistureDo not use this video product near water. Someexamples are: near a bath tub, wash bowl, kitchensink, or laundry tub, in a wet basement, or near aswimming pool.8. AccessoriesDo not place this video product on an unstable cart,stand, tripod, bracket or table. The video product mayfall, causing serious injury to a person, or seriousdamage to the product. Use only with stand, tripod,bracket, or table recommended by the manufacturer,or sold with the video product. Any mounting of theproduct should follow the manufacturer’s instructions,and should use a mounting accessory recommendedby the manufacturer.9. VentilationThis video product should never be placed near orover a radiator or heat register. If this product is placedin a built in installation verify that there is properventilation so that the camera temperature operateswithin the recommended temperature range.10. Power SourcesThis video product should be operated only from thetype of power source indicated on the informationlabel. If you are not sure of the type of power supplyat your location, consult your product dealer.11. Power-Cord ProtectionPower cords should be routed so that they are notlikely to be walked on or pinched by items placed uponor against them. Pay particular attention to cords atplugs, screws and the point where they exit theproduct.12. InstallationInstall this video product on a secure part of the ceilingor wall. If installed on a unsecured location the cameracould fall causing injury and damage.13. LightningFor additional protection on this video product duringa lightning storm, or when it is left unattended andunused for long periods of time, unplug it from thewall outlet and disconnect the power supply and cablesystem. This will prevent damage to the video productdue to lightning and power-line surges. If lightningoccurs, do not touch the unit or any connected cablesin order to avoid electric shock.14. OverloadingDo not overload the power supply or extension cordsas this can result in a risk of fire or electric shock.15. Object and Liquid EntryNever push objects of any kind into this video productthrough openings as they may touch dangerouselectrical points or short-out parts that could result ina fire or electrical shock. Never spill liquid of any kindon the video product.16. ServicingDo not attempt to service this video product yourselfas opening or removing covers may expose you todangerous electrical or other hazards. Refer allservicing to qualified service personnel.17. Damage Requiring serviceDisconnect this video product from the power supplyand refer servicing to qualified service personnelunder the following conditions.a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen intothe video product.c. If the video product has been exposed to rain orwater.d. If the video product does not operate normally byfollowing the operating instructions in the instructionmanual. Adjust only those controls that are coveredby the instruction manual as an improper adjustmentof other controls may result in damage and will oftenrequire extensive work by a qualified technician torestore the video product to its normal operation.e. If the video product has been dropped or the cabinethas been damaged.f. When the video product exhibits a distinct changein performance which indicates a need for service.18. Replacement PartsWhen replacing parts be sure the service technicianuses parts specified by the manufacturer or have thesame characteristics as the original par t.Unauthorized substitutions may result in fire, electricshock or other hazards.19. Safety CheckUpon completion of any service or repairs to this videoproduct, ask the service technician to perform safetychecks to determine that the video product is in properoperating condition.IMPORTANT SAFEGUARDSSECTION 1 GENERAL DESCRIPTION