Toshiba G3 Instruction Manual

Also see for G3 Plus Pack: Specification Application guideline Operation manual addendum

Contents

Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual viiThis manual describes the overview, installation, operation and maintenance/inspection ofG3 I/O adapter module (hereafter called "GA932 module" or simply called "GA932). Thismodule connects I/O (G3 I/O) of PROSEC T series T3/T3H into Unified Controller nv seriestype 1 light (PUM12). To use this device correctly, read "Safety precautions" first. For thisproduct, the repair and replacement due to wear or abrasion will be charged even during thewarranty period.The manuals for GA932 module are as follows.• Unified Controller nv series type 1 light Users manual – Basic hardware- (6F8C1497)describes the main unit hardware of nv series type 1 light controller.• Unified Controller nv series type 1 light Function Manual (6F8C1498)Describes the functions and basic use of nv series type 1 light.• Unified Controller nv series type 1 light T series Migration Hardware Manual(6F8C1619)Describes how to migrate from T series to nv series type 1 light.• Unified Controller nv series type 1 light T series Migration Guide (6F8C1587)Describes how to convert the system data from T series to nv series type 1 light.• Unified Controller nv series/Integrated Controller V seriesProgramming Instructions (6F8C1226)Describes the detailed specifications of the instruction words of the program languages(LD, FBD, SFC, ST) supported by the nv series and Integrated Controller V series.• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Basic-(6F8C1290)Describes how to create, debug, print, and save programs using nV-Tool.• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Setup-(6F8C1291)Describes the method to set up nV-Tool.• Unified Controller nv series High-speed Serial I/O SystemTC-net I/O Instruction Manual (6F8C1240)Describes TC-net I/O system, which is nv series high-speed serial I/O system.• PROGRAMMABLE CONTROLLER PROSEC T3H USER’S MANUAL (UM-TS03***-E032)Describes T3/T3H main unit system. Also describes General purpose digital I/O,Analog I/O , and G3 I/O except Special I/O.NotePlease refer to the instruction manual of each module about special G3 I/O (Transmission module)The figure used in the explanation is inserted to make it easier to understand of thereader, and it is not necessarily the same as the actual product. Please understand wemay carry out improvement without particular notice in order to improve performanceand function.Introduction