Toshiba Eagle T1 Series PLCs Installation Manual

Also see for Eagle T1 Series PLCs: Using manual Specifications

Contents

In Touch With Tomorrow TOSHIBA INTERNATIONAL CORPORATION13131 West Little York RoadHouston, TX 77041PH. 800 231- 1412, 713-466-0277 FAX 713-466-8773Programmable Controllers E- Mail plc@tic.toshiba.comPRODUCT INFORMATION October 2002More Analog Inputs for T1 μPLCsToshiba Houston offers the Eagle analog I/O for the T1 Series μPLCs. The Eagle I/O is universalanalog I/O. Eagle I/O allows T1 PLCs to work with the following analog signals.For the analog inputs, the Eagle I/O performs the A to D (analog to digital) conversion and loads adigital value directly into a T1 register. For analog outputs, the Eagle I/O reads a digital value outof a T1 register and performs a D to A (digital to analog conversion). Analog signal types andPLC registers are defined using the included simple setup software.Simple process control has never been easier or more cost effective. Now the analog valuesof temperature, pressure, flow, weight, etc. can be included into the sequencing, interlocking andpermissive control performed by the PLC.For more information contact your nearest Toshiba programmable controller distributor, or visit the Toshiba HoustonIndustrial website, www.tic.toshiba.com.Analog Inputs Analog Outputs♦ Thermocouples ♦ 0-20 mA ♦ 4-20 mA♦ RTDs ♦ 4-20 mA ♦ 0-100 mV♦ 0-50 mV ♦ 0-100 mV ♦ 0-10 VdcEagle 02012 Analog Inputs1 Analog OutputEagle 04044 Analog Inputs4 Analog OutputEagle 08008 AnalogInputsAlsoAvailable

/ 2

Related manuals for Toshiba Eagle T1 Series PLCs