Toshiba E6580772 Instruction Manual

Contents

E65807722WarningProhibitedDo not install the inverter in any place subject to vibrations or it could fall.Otherwise it can cause injury to people. WiringDangerMandatory▼ Be sure to perform the following preparatory work before proceeding to wiring.① Turn the power off.Wait 10 minutes or more after turning the power off and confirm that the charge lamp(on the inverter) is extinct.② Using a circuit tester that has a D.C. voltage measuring capacity of more than800V, check to see that the voltage remaining in the D.C. main circuit (between PCand PA) is below 45V.Failure to do this preparation could lead to electric shocks.Tighten the terminal board fixing screws at the specified torque.Failure to do this could lead to fire. About operationDangerProhibitedDo not touch inverter terminals when they are energized even if the motor is halted.Touching terminals while the power is energized could lead to electric shocks.Do not wipe the body with a wet cloth.It could lead to electric shocks.Do not pull on the cableIt could cause damage or error. About disposal of InverterWarningMandatoryDispose of the inverter as an industrial waste.Unless it is disposed of as an industrial waste, it will become risks for humaninjury.