Menu
Toshiba E-STUDIO352 Printing Manual
Also see for e-studio202L: Operator's manualNetwork fax guideUser manualService manualService manual
                                                                                                                                                                                                                                                                                                                                                                    |
Setting Up Print Options 225y The selectable options vary depending on the paper size.y “Center Double” can be selected only when the Saddle Stitch Finisher is installed.y 2-Sided printing cannot be set when the following paper size in selected at the “PrintPaper Size” drop down menu in the Basic Tab.- A5- A6- Statement- A4 Tab- Letter Tab5) Hole PunchThis sets whether a print job is printed with hole punches.- Center Top — Select this to create holes along the top edge and print.- Middle Left — Select this to create holes along the left side and print.Hole punching can be selected only when a hole punch unit is installed.6) Use Custom MarginCheck this to set the margin on the printed pages. When this is checked, click [Detail...] toset the margins in the Custom Margin dialog box.The margin range is between 5 mm and 100 mm. Less than 5 mm cannot be set for therange.y Enable this function to add the margins if the application does not support the marginfunction. When the application has the margin function, use the application’s functionrather than this option.y This cannot specify the binding margin for Booklet printing. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved