Basic Setup30 ENInitial settingYou need to follow these steps when you turn this uniton for the first time.1) Press [I/y ON/STANDBY].2) Turn the TV on. Select the input to which theunit is connected.Initial Setting menu will automatically appear.3) Press [ENTER] to start Channel Tuning.The unit will start getting channels available in yourarea.4) After channel setting is finished, “ClockSetting” will appear. Then press [ENTER].Clock Setting menu will appear.5) Press [ENTER] again, then follow the steps 4 to5 on page 34 in “Manual Clock Setting”.Initial SettingChannel TuningInitial SettingClock Setting
