Toshiba D-KR4 Owner's Manual

Also see for D-KR4: Owner's manual

21Connections Basic SetupIntroductionTo wall outletTo OUTPUT(R/L)Notes• Refer to the owner’s manual of the connected TV as well.• When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before anyconnections.• If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (notsupplied) and then connect to your TV.• Connect the recorder directly to your TV. If you connect the recorder to a VCR, TV/VCR combination, video selector or AVamplifier, the playback picture may be distorted due to copy protection.To OUTPUT(VIDEO)To OUTPUT(S-VIDEO)Video/audio cable (supplied)If the TV has an S-video input, connect the recorderwith an S-video cable. When using an S-videocable, do not connect the yellow video cable.(yellow)(white)(red)(red)(white)To video inputs (yellow)To audio inputTo S-video input3 Connect to a TV equiped with audio/video inputs.Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminalis not available.4 Connect the power cord of the recorder to a wall outlet.Make sure that the powered recorder lights the LED on the front panel.TV or monitor withaudio/video inputsS-Video cable (not supplied)