Toshiba Carrier RBC-AXU33UP-UL Operation Manual

Also see for Carrier RBC-AXU33UP-UL: Installation manual

■ Names and functions of indicatorsand controls on indoor unitSWING FANFIX QUIETHi POWERCOMFORTSLEEP1 Infrared signal emitterTransmits a signal to the indoor unit.2 START/STOP buttonPress the button to start operation.(A receiving beep is heard.)Press the button again to stop operation.(A receiving beep is heard.)If no receiving sound is heard from the indoor unit,press the button twice.3 Mode select button (MODE)Press this button to select a mode.Each time you press the button, a mode is selectedin a sequence that goes from A : Auto, : Cool,: Dry, : Heat, : Fan only, and back to A.(A receiving beep is heard.)4 Temperature button ( )............. The set temperature is increasedup to 86°F (30°C).............. The set temperature is dropped downto 62°F (17°C). (A receiving beep isheard.)5 Fan speed button (FAN)Press this button to select fan speed.When you select AUTO, the fan speed isautomatically adjusted according to the roomtemperature.You can also manually select the desired fanspeed from among five settings.(LOW , LOW+ , MED ,MED + , HIGH )(A receiving beep is heard.)6 Auto louver button (SWING)Press this button to swing the louver.(A receiving beep is heard.)Press the SWING button to stop the louverswinging.(A receiving beep is heard.)7 Set louver button (FIX)Press this button to adjust the airflow direction.(A receiving beep is heard.) While this button iskept depressed, the receiving tone continuouslysounds.8 Off timer button (OFF)Press this button to set the OFF timer.9 On timer button (ON)Press this button to set the ON timer.10 Reserve button (SET)Press this button to reserve time settings.(A receiving beep is heard.)11 Cancel button (CLR)Press this button to cancel ON timerand OFF timer.(A receiving beep is heard.)12 High power button (Hi POWER)Press this button to start the high poweroperation.This function is not operated group control.13 PRESET buttonPress this button to change the operation modeto the preferred operation mode memorizedpreviously. To memorize the operation mode,press this button for at least 3 seconds during thepreferred operation mode. P is displayed and theoperation mode is memorized.14 COMFORT SLEEP buttonPress this button to start the OFF timer operationthat automatically adjusts the room temperatureand the fan speed. You can select the OFF timertime from four durations (1, 3, 5 or 9 hours).During group control operation, the settemperature and the fan speed are notautomatically adjusted. Only off timer function isactivated.2 PARTS NAME OF REMOTE CONTROLLEROperations Manual- 3 -3-EN