If you park a call and it is not retrieved, it will recall to the parking station and one of thefollowing occurs:If your station is idle when the system Call Park recall timer expires, theparked call automatically recalls to your station.If your station is busy, the parked call camps on. If you have an LCDtelephone, you can let the system automatically select an available orbitnumber which displays on your LCD.Advanced OperationCall Park Orbits park a call1. While on a call, press Park in Orbit or Cnf/Trn + #33. The LED flashes green(consultation-hold). If you were on an extension during the call, and you have linebutton on your telephone, the line LED will flash until the call is picked up(depending on programming).2. Specify the Park Orbit using one of the following:Press * and the system automatically selects a General Park Orbit between7000~7019. The chosen orbit appears on the LCD.Enter a valid extension.Press # and the system automatically selects your extension as the orbit.3. Hang up. The caller’s extension or line number and the orbit number are shown.If the parked call is not retrieved within a specified time, the call rings back toyour telephone. When a parked call recalls your telephone, the LCD shows theline or extension that is recalling and the orbit number. To retrieve a parked call:Press Park in Orbit...or press your extension button + #32.Enter the Orbit Number where the call is parked or # for the extensionfrom which you are calling. You cannot use * to retrieve a parked call.The extension LED flashes at the in-use rate when the call is retrieved.PAGEAll Call PageYou can make an All Call Page to telephones assigned to the “All Call Page Group.”Stations are assigned to the “All Call Page Group” in system programming.To make an All Call Page1. With the handset off-hook, press All Call Page...or dial #30. This pages alltelephones in the All Call Page Group but, depending on system programming,you may or may not page external speakers.2. Make your announcement then hang up.