18D4222901MCopyright © 2013 - 2018 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/en/index.htm6.2 Electronic shutter specificationExposure time MANUALMANUAL 30μs to 16sExposure time Accuracy 3μs (in overlap exposure operation)6.3 Random Trigger Shutter specificationTrigger Mode External trigger, Software trigger (factory setting : External trigger)External trigger Input via I/O connectorSoftware trigger USB3 Vision command controlExposure time Edge mode, Level mode, Bulk mode (factory setting : Edge mode)Edge mode The exposure time depends on the MANUAL Exposure time settingLevel mode The exposure time depends on External trigger widthBulk mode The exposure time depends on the MANUAL Exposure time settingNumber of Exposures in Bulk mode 255 times (maximum)Sequential Shutter 16 entries (maximum)Trigger Delay 0 to 2000000μs (factory setting : 0μs)AntiGlitch 90ns to 2ms (factory setting : 90ns)AntiChattering 2μs to 2ms (factory setting : 2μs)6.4 GPIO Input signal specificationI/O Connector Pin No, 4 Pin : Line0Input circuitInsideDC3.3V0V10kΩ43Input level Low: 0 to 0.5V, High: 2.0 to 24.0VPolarity High active / Low active (factory setting : Low active)Pulse width 50μs (minimum)Input impedance High impedance