Touch Screen Controller Owner's Manual23-ENBy using the Report Creation Software, you can easily check/output reports (monthly report/daily report) for electric powerallocation summed by the Unit with a PC. When using the Report Creation Software, apply the following settings.● NOTEFor details on how to use the Report Creation Software, refer to the operation manual of the Report Creation Software.1 Set the IP address of the Unit (P.62)2 Set the summation date for the power allocation data using the Unit (P.68)1 Install the Report Creation Software on the PCFor details, refer to the "Installation Instructions" included in the attached DVD.2 Register the target system (this Unit) in the Report Creation SoftwareFor details, refer to the operation manual of the Report Creation Software.When using the PC software Data Analyzer, you can display the operation status and operation history of the air conditionersaggregated by this Unit on a PC screen.● NOTEFor details on how to use the PC software Data Analyzer, refer to its operation manual.1 Set the IP address of the Unit (P.62)1 Install the PC software Data Analyzer on the PCFor details, refer to the "Installation Instructions" included in the attached DVD.2 Register the target system (this Unit) in the PC software Data AnalyzerFor details, refer to the operation manual of the PC software Data Analyzer.Settings when Using Report Creation SoftwareUnit settingsPC settingsSettings when Using the PC Software Data AnalyzerUnit settingsPC settings
