Menu
Toshiba BDX3500KU Quick Start Manual
Also see for BDX5500KU Symbio: User guide
  | |
Contents |
Unpack the box and check the componentsQuick Tour BDX3500KU/BDX5500KUQUICK STARTThe online User’s Guide contains important safety precautions notincluded in this document. Please review the safety precautionsin this document and the online User’s Guide prior to using thisproduct. Complete instructions are located on Toshiba’s web siteat support.toshiba.com.When the player is connected and powered on for the first time, please follow the on-screen setup instructions as directed.Get detailed product information:A comprehensive User’s Guide for your model is available at support.toshiba.com as wellas up-to-date product information.1. Remove the components and the SymbioTM Streaming Media and Universal Disc Playerfrom the box. Save the packing materials in case you need them later.2. Remove the documentation for important information.Your Product comes with:• Remote control and two AAA batteries•Quick Start (this document)••Desktop stand & two screws (For BDX5500KU only)• AC adapterNoticeCAUTION• Subject to Change. Product specifi cations, configurations, prices,system/component/options availability are all subject to changewithout notice.Playing a discNOTE Please wait for a moment for the disc to load.NOTE The images in this document are sample illustrations and are subject to changewithout notice.1 452 31452 1 52 663 4314523Place the disc on the disc tray with its label side facing up.2Playback starts automatically.To pause playback, press ..To return to the normal playback, pressTo stop playback, press .4Press the button to close the disc tray.3Initial SetupAfter all connections are complete, connect to the AC adapter.Install the batteries (two AAA batteries) matching the polarity indicated inside batterycompartment of the remote control.Turn on your TV. Press the button on the TV’s remote control that accesses the TVHDMITM input channel (for details, refer to the TV’s User’s Guide). Once the TV isconnected by a HDMI TM cable, please allow a few moments for the opening screento display.Press the button on the remote control to turn on the unit.1243Press the button on the remote control to open the disc tray.1Your player has an integrated Wi-Fi® device and antenna. No physical connection to the wireless router is necessary.1 Configure your player to access the wireless access point or router.2 The network configuration and connection method may vary depending on the equipment in use and the network environment. For the best wireless performance, it is recommendedto use an IEEE 802.11n Wi-Fi CERTIFIEDTM network access point or wireless router.Connecting to a wireless networkConnecting your SymbioTM Streaming Media and Universal Disc PlayerConnecting to a digital AV receiver/amplifierConnect the HDMI TM cableNOTE Do not tilt the connector when inserting it into the HDMITM jack, and make sure theshapes of the jack and the connector correspond.NOTE To enjoy viewing 3D content, an HDMITM connection with a High Speed HDMITMcable is required. (HDMITM cable sold separately).Digital audio coaxial cable(not supplied)AV receiver/amplifierHDMITM cable(not supplied)Front panelBack panelDisc trayIR SensorTurns the power on (indicator glows green) or restoresthe unit to the standby mode (indicator is off).Playback/pause (touch button for BDX5500KU)Opens or closes the disc tray (touch button for BDX5500KU)NOTE For BDX5500KU, the sensor fi eld is within the rectangular area and the indicators are located in thefield.These indicators will go off briefl y after power on. To turn on the indicators again, simply touch the sensor fieldand the indicators will light up.1 452 31 DC IN 12V jackConnects to AC adapter output.2 USB jackConnects a USB flash drive for external storage for BD-LiveTM content,or for media playback.3 LAN jackConnects to home network for Internet and network access.4 HDMI OUT jackOutputs video/audio signals to a connected TV, monitor or AV receiver/amplifier. Connects to a TV, monitor or AV receiver/amplifier equippedwith HDMITM input.5 COAXIAL DIGITAL jackOutputs digital audio signals when connecting the coaxial digital cable.All other cables and 3D glasses are sold separately. If any itemsare missing or damaged, notify your dealer immediately.BDX5500KUBDX3500KUBDX3500KU BDX5500KU(to DC IN 12V jack)Key FeaturesThis player is a Wi-Fi CERTIFIED MiracastTM Wi-Fi Alliance® device; connection and/or compatibility issues with other Wi-Fi CERTIFIED MiracastTM devices are possible.Issues include, but not limited to:• non-transfer of certain kind of data through the mirroring function of this player.• connection errors due to functions of sending device.• video and/or picture contents displayed on sending device may not be displayed as is through the player.Models Key featuresBDX3500KUBDX5500KU Blu-ray TM, BD-Live , Blu-ray 3DTMTM, Wi-Fi ®, Wi-Fi DirectTM, MiracastTM, USB Video, ePortal, Internet , MediaShare, UDETM 4K Upscaling, Technicolor 4K Certified, and key media apps.Blu-rayTM, BD-Live TM, Wi-Fi ® , Wi-Fi DirectTM, MiracastTM, USB Video, ePortal, Internet, MediaShare, and key media apps.Please Do The Following Before ReturningThis Product To The Store.If you are experiencing a technical problem or have questions regarding operation, authorized service centers,warranty or parts, please contact our Customer Support Center at:(888) 592-0944 (From inside the United States)(949) 583-3305 (From outside the United States)Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Sectionof our website:support.toshiba.comTHANK YOU,Sensor field areaCAUTION AC adapter operates on AC 100-120V. Using an adapter other than theone supplied with the unit may damage the unit.Assembling the Desktop stand for BDX5500KU (Optional)1 32 Gently tighten the screws with the screwdriver (not supplied). In order to usethe cover of the Desktop stand slot for the future, please attach it to thebottom of the Desktop stand. Refer to the following figure for details.Insert the two screws that are included with the playerthrough the holes of the Desktop stand. Align the screwholes on the player with the screws.The Desktop stand comes with the SymbioTM Streaming Media and Universal Disc Player; you may assemble the Desktop stand before all connections.Use a screwdriver (not supplied)to unscrew the screws on therear panel.Standard Limited WarrantyNOTE The images in this document are sample illustrations and are subject to change without notice.sensor |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved