Toshiba BDX3100KB How To Upgrade

Copyright 2011 TOSHIBA CORPORATION All Rights Reserved Page 1 of 3How to Upgrade the F/W1 Firmware upgrade requires USB Drive of max.2GB size. Please make sure, to format the USB drivewith FAT/FAT32 format before starting with the upgrade procedure.・ Create a new folder on the USB drive and name it “UPG_ALL”・ Unpack the firmware file and copy into folder “UPG_ALL”.2 Turn on the BD‐Player and make sure, you can see the player’s on Screen Menu.・ Insert the USB Drive containing the Firmware upgrade file into the USB Slot of the Blu‐ray player asshown in figure‐1.Figure‐13 Press the "SETUP" button on remote controller.・ Via UP/DOWN keys on the remote controller, select➣ “Symptom”➣ “Upgrade”➣ “USB Storage”Syetem Disc Auto PlaybackLanguage CECPlayback Easy SetupSecurity Load DefaultNetwork UpgradeSETUP ExitDiscUSD StorageSetup Menu・・・ General Setting ・・・Move Customer Key to select menu optionthen use "OK" key to selectFigure‐2Note; “USD Storage” function may not be visible until you select it through “SETUP menu”

/ 3

Related manuals for Toshiba BDX1100KB